Pisces Engineering Ltd. - "Practical solutions to technical problems"
 
  Pisces Engineering Home Pagepvc pipe abs pipeplastic tanks - PP HDPE PE PVC pumps and filtersAquaculture systems and equipmentcontrol panels and systemsContact pisces  
<<Back to Pumps and Filters homepage
We use Grundfos pumps in our systems as we find them reliable and easily serviceable. The Grundfos range has pumps to cover almost all applications and those shown below are a fraction of the full range. Our engineers can specify a pump to your exact requirements - contact us with information on the flow rates, suction lift and pumping head you require. Our engineers can also size your pump for you and calculate your system friction losses etc.

To help size your pump for you we will need to know the flow rate, the height of the water above or below the pump, the height you are pumping the water to and the approximate size and length of your pipework.
C Series

Multistage high pressure booster pumps
 

gfos_cr.jpg (29799 bytes)

wpe5.gif (17122 bytes)

 
The Grundfos C range are multistage pressure booster pumps with flows from 0.2 to 75m3/h and pressure ranges from 5 to 200m (0.5 to 20 bar). The vast array of pumps in this range allow very tight specification to your exact requirements. The C range are available with flanged or threaded connections

Group  Pump Body materials
CR  Cast iron / 304 stainless steel construction
CRI  304 stainless steel construction
CRN  316 stainless steel construction
CRE  As CR above with integral speed control
CRIE  As CRI above with integral speed control
CRNE  As CRN above with integral speed control

T Series

Multistage high pressure booster pumps
 
gfos_tp.jpg (28361 bytes)
wpeA.gif (16525 bytes)

 
The T Series range are in-line pumps with flows from 0.5 to 2500m3/h and pressures from 2 to 100m (0.2 to 10 bar). Particularly suited to moving large volumes of water at medium pressures

Group  Pump Body materials
TP  Cast iron 
TPE  As TP with integral speed control

N Series

Multistage high pressure booster pumps
 
gfos_nm_np.jpg (15789 bytes)
wpeD.gif (11660 bytes)
The N Series range are 90 degree pumps with flows from 2 to 100m3/h and pressures from 3 to 50m (0.3 to 5 bar). Particularly suited to moving medium volumes of water at low to medium pressures. NM and NP pumps units differ only in that the motor speeds are greater in the NM range.

Group  Pump Body materials
NM  Cast iron body with 304 stainless steel impeller
NP  Cast iron body with 304 stainless steel impeller
NME  As NM with integral speed control
NPE  As NP with integral speed control